Mirroring Adult Sites - 4 Part Tutorial

In this next series of tutorials I will be exploring the benefits of utilizing your existing content to build more sites in the least amount of time possible, in fact, after you have completed the steps in this tutorial series you should be able to build over 20 types of site within 5 minutes using a single set of 50 pictures.

So, onto the start of our tutorial.

Stage one in this tutorial is something we have ALL done before, so what you need to do is this...

Build a 50 pic free site, this is using a lot more content than a 'standard' free site however, what we are actually going to be making is a set of AVS sites and several TGP galleries, along with some SE pages and also some links list mirrored pages using this set of 50 images by building just ONE site! Sounds impossible? It isn't... read on....

Your site should have the following on it:

1) Warning Page (index.html)
2) Menu Page (menu.html)
3) Gallery Pages (5 galleries of ten pictures called gallery1.html, gallery2.html etc)
4) HTML Large image pages x 50 (picpage1.html, picpage2.html, etc.)
5) Multi Site FPA (fpa.html)

Now lets break these individual pages down into sets of instructions for each:

Warning Page.

This should have your standard warning text placed on it, along with an enter AND an exit link. The 'enter' link should link to your Multi Site FPA and the 'exit' link should go to a program such as the ARS Discreet Browser tour page.

Menu Page.

This should be a page containing an odd sized banner, links to your 5 gallery pages, plus text links at the bottom of the page ideally, these text links should be in the same style as the niche tables we created for the surfer trap except they should only contain 4 cells instead of 8. These links should go to a different 'niche' as the one you are building your current site for and, link to the existing FPA's of your surfer trap.

Gallery Pages.

On your gallery pages, ALL of the thumbnails should be linked to the relevant HTML page with a text link at the top and at the bottom of the HTML page (No Banners are to be used on the gallery pages!) Also, the file names of the images should be pic1.jpg, pic2.jpg, etc for the full sized images and, thumb1.jpg, thumb2.jpg etc for the thumb nailed images. your images MUST be named this way!!

Multi Site FPA.

This should link to the individual FPA's that you should already have on your server if you followed the surfer trap tutorial series (If you did not create this surfer trap the tutorials can be found at this link) as well as linking to the Single Site FPA's this should also have a 'no thank you' link which goes to your Menu Page.

Images.

You need to have 50 images, you also need to have 50 thumbnails for the content you will be using on this site. I usually select my content by the niche I am building for, rename the images using The Rename then, once renamed I use Thumbnailer from Smaller Animal to create the thumbnails for each of the renamed images. This will give you 50 full sized pictures with 50 thumbnails named respectively for the larger image.

They are the basics, now onto the good stuff...

Once you have created these pages you need to create some folders on your Hard Drive which will be the SAME structure you will have on your server. This folder structure should look somewhat like this once you have saved each of the pages we have just created into their respective sub folders:

FreeSite/index.html
FreeSite/AVS/
FreeSite/FPA/fpa.html
FreeSite/Galleries/gallery1.html, gallery2.html, gallery3.html, etc, etc.
FreeSite/Images/pic1.jpg, etc.
FreeSite/Images/Thumbs/thumb1.jpg, etc.
FreeSite/LinkList/
FreeSite/Menu/menu.html
FreeSite/PicPage/picpage1.html, picpage2.html, etc.
FreeSite/Recips/
FreeSite/Engine/
FreeSite/TGP/

This will give you 5 folders with HTML pages in them, one folder with the full sized images, one with thumbnails in it and five empty folders.

At this point we will end the first stage in this tutorial as this should take you a couple of hours to complete.

Article written by Lee.

http://www.adult-traffic-sources.com

Ok, in stage 1 of this tutorial we learnt the basic 'setup' for our multisite generation now we have to start putting the rest of our puzzle together.

At this stage in the tutorial we should now have a 50 pic free site, all of the images are in the appropriate folder on our HD along with the HTML in their own folder. If you have not already done so, you need to ensure that when you add/added the links to your individual HTML pages that you call the images like this:

/FreeSite/Images/pic1.jpg

The Thumbnails like this:

/FreeSite/Images/Thumbs/thumb1.jpg

The gallery links like this:

/FreeSite/Galleries/gallery1.html

And the FPA from the warning page like this:

/FreeSite/FPA/fpa.html

Why are we calling the links like this and not like, http://www.mydomain.com/FreeSite/Ga...s/gallery1.html I hear you ask, well the answer is simple, in order to use this site TEMPLATE over and over again, we need to ensure that there is a standard way of calling the links, this way, once we decide duplicate this site on a different domain, all we do is upload the folder to our server with a different set of images and we have another set of sites built.

Ok, we now have our free site but, we have some empty folders that need filling up, here is how we are going to achieve that.

What we now have to do is re-open the Gallery Pages, DO NOT change the image calls or the thumbnail calls however, what you will need to do is select 15 TGP's that you would like to submit to, download the recip buttons for these TGP's and save them in the /FreeSite/Images/Recips/ folder.

Now we have the gallery pages open we need to modify them like this..

Take the top text link that you created and replace that with a 3 cell table. In this table for the first gallery, you need to call the first 3 recip links for the TGP's you want to submit to and link them to the appropriate recip url for each of the TGP's again, calling the recip images like this, /FreeSite/Recips/recip1.gif. Also, you will need to modify the text link at the bottom of your gallery pages, I would suggest creating an 8 cell table, containing 8 niche text links, four of which should go to your Single-Site FPA's (as created for the surfer trap) and the remaining 4 text links should go directly to your sponsors site tour page.

Now save this newly created page as tgp1.html in the /FreeSite/TGP/ folder. Do the above again for the remaining 4 gallery pages but calling a different set of recip links each time. each time you modify a gallery page save it in the /FreeSite/TGP/ folder so gallery2.html would be renamed to tgp2.html, Gallery 3 would be called tgp3.html and so on.

What you should now have is a single 50 pic free site with 5 galleries of 10 pics, all pics going to the larger image on a HTML page and, 5 TGP galleries.

This is as far as we go with the tutorial today however, in the next stage we will continue to fill in the rest of the puzzle pieces.

Article written by Lee.

http://www.europeanwebmasters.com

So we hit stage three of our tutorial in this stage we are going to make some pages for our top 5 AVS systems. However, as we did in the last tutorial with the new TGP galleries we created we are going to use the same content and same pages that we have already built. On with the tutorial...

Anyone who build AVS sites will know that you need to have a standard site layout. This usually consists of an entry page (or a warning page), a navigational page (or in our case our menu.html page) and some gallery pages.

So the first thing we need to do is open up the warning page. Once this page has been opened we now need to do some editing of the page, what I would suggest is moving the warning text to the lower half of the page and at the top making some 'juicy' sales text, depending on the niche you are targeting with this site you may also like to add a couple of the original thumbnail images at the VERY top of your page however, these should NOT be linked to the full size image.

Once you have edited your page to a reasonable standard for the AVS you now need to save this page in the /FreeSite/AVS/ folder that you originally created on your HD. I would suggest saving the page as something like avs1.html or the name of the AVS you will be using this page for.

Once you have done this you now need to duplicate this page but save it as a different name in again, in the /FreeSite/AVS/ folder so you will end up with avs1.html, avs2.html, etc.

At the moment these AVS pages have no AVS script on them so, we need to visit the AVS system we are going to be using and fill out the details to have the AVS generate an AVS signup page script for us. Once we have the coding that the AVS provides we now have to place this on our avs1.html page. You should repeat this for each of the AVS's you wish to use and save each instance of the generated AVS script to a separate AVS*.html page.

be aware, that when you are putting your information into the AVS to generate the script, you should enter the 'members area url' as the page we created for our navigation so, the AVS script location will be /FreeSite/AVS/avs1.html and, the members area page will be, /FreeSite/Menu/menu.html.

Once you have placed the script on our avs.html pages you should now have the following sites ready:

1) 50 Pic Free Site With Pics On HTML Pages.
2) 5 TGP Galleries With Pics On HTML Pages.
3) 5 AVS Entry Pages.

Now we are starting to see how using one set of content can amount to a mass of sites all of which can be sending traffic to our sponsors and, to our surfer trap.

This is where stage three of our tutorial ends however, in our next tutorial we will continue to make some more sites and in an effort to get some traffic we start to play with the ones we have currently created.

Article written by Lee.

http://www.gaywidewebmasters.com

We are now going to take our basic template and start to make some pages for the link lists for this you will need to open up your original warning page. Once you have this page open you need to visit a couple of the link lists that you use. Go to the submissions page of the link list and download their reciprocal buttons.

In the same way that we did with the TGP pages we created you now need to edit the warning page you have open and insert the recip links on your warning page, ideally and, as most link lists will require this, the recip links should be placed above the enter and exit links.

Once you have done this, you now need to save your newly edited page as linklist1.html in the /FreeSite/LinkList/ folder, do this for as many of the link lists that you wish to submit to, each time saving the new page in the /FreeSite/LinkList/ folder.

Also at this stage, we should add a console to our link list page, ideally a blur console with links going to your surfer trap FPA's. You can find the Java coding to create a blur console on the tutorial about building a surfer trap.

Once we have done this, we now have some more sites created. However, this time, the page/s we have just created are designed to build the traffic we have to our site/s.

Once you have these pages saved you now need to re-open your original warning page once more.

This time, we are going to optimize the page for the search engines, again, in the same way we added our ALT tags on the surfer trap we are going to add them to the warning page however, we are also going to optimize our keywords, description and, site title.

Once we have optimized our original warning page we should now save this as se1.html in the /FreeSite/Engine/ folder we created at the start of this tutorial. Once one SE page has been created, you need to create a selection of others making sure that you swap around the meta tags to ensure they are all different to each other, I would suggest making three variations of these SE pages each time saving them in the /FreeSite/Engine/ folder.

The next thing we are going to do is to 'dirty' these SE pages up some more, pretty much in the same manner as we did with the surfer trap tutorial. What we need to do is add a small pop up console to the three SE pages along with a blur console, these consoles can be the same ones that we used for our surfer trap or, we can create new ones however, I think the smart thing to do would be if we used the ones we currently have online. So once we have added these consoles we need to save the pages.

Also, to these SE pages we should add our Banner exchange code, as these will be going into the search engines there are no rules as to what we can and can not do on these SE pages so we should make sure that even if they just get one hit, we get additional traffic from them. By adding a banner exchange code as we did on the surfer tutorial we can drive additional traffic either to our sites or to our surfer trap, where you send this traffic is your choice. If you want to sign up for our new banner exchange you can find it at http://www.pornclient.com.

Now we have the completed site template built. We need to submit the pages and sites we have just completed to the TGP's, AVS's, Link Lists and, the Search Engines.

Once we have submitted these sites all that we need to do to create a new set of sites is to find another set of 50 images, rename the images as we did at the start of this tutorial, pic1.jpg, thumb1.jpg etc and simply upload the site to our server without the full size images and the thumbnails. Once the HTML pages are online, we now have to upload the full size images and the thumbnails and we have a set of sites using different content to our original one built in less than 5 minutes.

The best thing with these sites is that if a any time we want to alter the layout, all we need to do is edit the HTML of the version we have saved on our HD and we have a new template ready to use.

I hope you have found some use out of this tutorial and, I am sure you can think of other ways in which we can use templates of this style, this tutorial was just detailing some of the basics however, we can make the template as simple or as complicated as we like. Our only limits are what we make for ourselves.

Article written by Lee.

http://www.adult-traffic-sources.com