Ok people we have hit the final stage in our surfer trap, Stage 8.

All we are really going to do in this stage is a brief recap over what we have done so far along with checking that our trap is working properly.

In order for us to check our trap is working properly we need to upload it to our server if we haven't already done so, therefore, you should do this now.

Once the surfer trap has been uploaded we now need to go to the first page, the Multi-Site FPA.

Depending on how you set up your Multi-Site FPA you should either get a pop up or not.

You should also have a counter AND a banner exchange code loading at the bottom of the page below your 'no thanks' link.

If this works how you want it to then this stage is working ok.

The next thing we need to check is that ALL of the links off this Multi-Site FPA are working so expect to get a lot of pop-ups while we check this.

You should click on each of the Single-Site FPA's in turn ensuring that for every one you have a pop-up console appear.

In addition to checking the Single-Site FPA links you should now click on the 'no thanks' link along with the counter code and the banner exchange code on your Multi-Site and Single-Site FPA's.

If these all load fine then this stage of the checking is complete.

Next, we need to close down any and all of the FPA's we may have open including the Multi-Site FPA.

You should now be left with a couple of consoles, again, follow the links on your consoles including any to the counter you chose along with any banner exchange code you utilized on your consoles.

Again if these work how you expected them to, this section of the checking process is now complete.

For the next step, you need to log into your counter AND banner exchange account, you want to make sure that you have gained additional impressions and rankings from your banner and counter impressions and clicks.

Be aware however, that some counters and banner exchanges will not count multiple views and click from the same IP address so you may only show one or two additional clicks, impressions, or rankings. This is perfectly normal.

If your accounts have gained additional ranks, impressions, and clicks then this stage is completed.

Close down your consoles, you should now get the blur consoles that you created (if you used them) again, as before, check that all of the links from this consoles work.

If they do then you now have a fully complete Surfer Trap to use.

So, what next? Well there are a couple of options, you can mirror this surfer trap to experiment with your sponsors different tour pages, link your first mirror to the second tour page, your third to console free tour pages, etc.

Another good thing that you can do is to create additional Multi-Site FPA's however, this time, create them by niche so where we have a general Multi-Site FPA at the moment you could use this same method for a Gay, Asian, Teen, etc Multi-Site FPA using the same methods we did when we created this trap.

You should always sign up for a new counter and banner exchange code for each variation of your surfer trap. This way, you get to see performance based on a new working model enabling you to decide which version of the trap works best for you.

I hope this tutorial has given you some insight into how we can generate, filter and trade traffic whilst marketing our sites effectively and, that it has given you some ideas on how you can implement even the simplest item provided to you by your sponsor to generate sales.

For those of you who have been following this tutorial I would like to thank you and wish you all the best with your new found marketing skills.

If you have any questions as always, feel free to post on the forums and we will endeavor to help you out.

Article written by Lee.

http://www.adult-traffic-sources.com